how do i build a wooden fence

Best answer


To build a wood fence,start bydigging holes in the areas where you want to place your fence posts. Then,place the posts into the holes and fill the areas around them with concrete to stabilize the posts in the ground. After that,attach 2 by 4 fence rails in between the posts,which will act as support boards.

People also ask


  • How do you build a fence step by step?

  • The first step in building your fence is to set the posts on the ends and corners of the fence. It鈥檚 important that the posts be deep enough: 32 in. deep is the minimum for a 6-ft.-tall fence. Dig the holes with a clamshell-type posthole digger (Photo 1), making sure that the holes are flat and solid on the bottom.

  • How to build a concrete fence with concrete posts?

  • Make the hole 3 times wider than the diameter of your posts and to a depth that鈥檚 鈪?of the length of the post. Place a post in the center of the hole and fill it with concrete. Allow the concrete to fully dry and harden. Install the fittings, rails, and fence mesh.

  • How do you finish a wood fence?

  • Finish by adding several coats of wood sealer to protect your fence from the weather, and painting it in a color of your choice. For tips on how to build a gate into your fence, keep reading!

  • Why build your own wood fence?

  • There’s a certain satisfaction that comes from building things that you get to use every day and a fence is a great starting project. Easy to do even for a beginner, building a wood fence requires few tools or skills. Building your own can also, of course, save you some serious cash! Just get started with Step 1 below to build your own fence.

    Leave a Reply

    Your email address will not be published.