how to attach wood nailer to steel beam

People also ask


  • How do you attach a nailer to a beam?

  • The nails should be shot in about every 24. Then use top flange hangers to install the joists. As an alternate you can weld 1/2 bolts on to the top of the beam to secure the nailer. the top flange.

  • What type of Nailer do you use to support wood framing?

  • I am using a double 2x P.T. wood nailer to steel beam detail when supporting wood framing on steel. I use a double plate so that common box nails can be used without nailing through to the steel.

  • How to connect wood joists to steel beams?

  • There are a number of different ways to connect wood joists to steel beams (2x (should really be a 3x min. for nailing) plate bolted to the top flange and use top hung joist hangers, 2x plate attached to the top of the bottom flange, etc.) but the real concern is how does the load from steel beam get transfered to the foundation.

  • How to attach wood to a steel I-beam?

  • How to Attach Wood to a Steel I-beam Step 1. Cut a wooden plank of 2×6 or 2×8 stock to length using a circular saw. Step 2. Measure alternating holes at 12-inch intervals in the I-beam with a tape measure. Mark the points with a pencil. Step 3. Drill 1/4-inch holes with a drill and a metal bit. If …

    Leave a Reply

    Your email address will not be published.