how to attach wood nailer to steel beam

People also ask


  • How do you attach a nailer to a beam?

  • The nails should be shot in about every 24. Then use top flange hangers to install the joists. As an alternate you can weld 1/2 bolts on to the top of the beam to secure the nailer. the top flange.

  • How to connect wood joists to steel beams?

  • There are a number of different ways to connect wood joists to steel beams (2x (should really be a 3x min. for nailing) plate bolted to the top flange and use top hung joist hangers, 2x plate attached to the top of the bottom flange, etc.) but the real concern is how does the load from steel beam get transfered to the foundation.

  • How to attach wood to a steel I-beam?

  • How to Attach Wood to a Steel I-beam Step 1. Cut a wooden plank of 2×6 or 2×8 stock to length using a circular saw. Step 2. Measure alternating holes at 12-inch intervals in the I-beam with a tape measure. Mark the points with a pencil. Step 3. Drill 1/4-inch holes with a drill and a metal bit. If …

  • Can I use top mount hangers on steel beams with wood filler?

  • As illustrated here, steel beams with wood filler require top mount or face mount hangers to attach to the TRIFORCE open joist. The use of top mount hangers can be done in certain conditions. As per those examples below, you can use a wood sill plate fix to the steel beam and fix the hangers to that sill plate supporting the joists.

    Leave a Reply

    Your email address will not be published.