how to drill a square hole in wood

Best answer


Install a suitable drill bitPlace the drill bit to one corner of the drawn squareUsing a high powered drill,drill until you鈥檝e made a clean hole through the woodRepeat the previous steps with each square cornerUse the saw to cut along the reference square lines

People also ask


  • Can you drill a square hole?

  • Drilling a square hole, especially in soft material such as wood, can be done quite easily. Traditionally there are many ways to do this but ideally these three ways can be grouped into 3 main methods.

  • How to drill a square in wood with a cordless drill?

  • Now install a appropriate drill bit in your cordless drill. Put the drill bit on one of the corners of the square and drill through it. Repeat for all the corners of the square. Now use this hole as a starting point for the saw. Cut through the wood along the line of the square. Repeat for each side of the square.

  • How to cut square holes in wood with a jigsaw?

  • How to Cut a Square Hole in Wood with a Jigsaw 1 Measure. The first step is of course, to get the piece of wood you are cutting the square into and make the appropriate measurements. 2 Secure the Wood. The next step here is to secure the wood to a surface (on each end). … 3 Drill the Starter Holes. … 4 Make the Cut. … 5 Sand it Down. …

  • How to drill a hole in wood?

  • Thus it is a more flexible method considering the thickness of the wood and the size of the hole you want to create. Create a Square hole using drill press: It will be better to create a small punch hole before applying a bigger one at full speed. The intention of creating a small hole is to help with the traction and friction.

    Leave a Reply

    Your email address will not be published.