how to finish a wooden table top

Best answer


Sand the table, beginning with the coarsest-grit sandpaper (100 grit) and sanding in the direction of the wood grain. Next, sand the table with the 150-grit paper, and finishby sanding with the 220-grit paper. Wipe the surface of the entire table using the tack cloth.

People also ask


  • How do you finish a wood table top with sandpaper?

  • If the finish is a stain, you will want to use sandpaper and sand with the grain of the wood until all the stain is gone. Use a hand power sander if you want to, but be careful not to gouge the wood. Begin with 100 grit sandpaper and move to a finer paper to finish for a smoother surface.

  • Should I finish my wood kitchen table?

  • Should I Finish A Wood Kitchen Table? In most cases, you should definitely put some kind of finish on your wooden table. There are many reasons to do this, but most of it comes down to durability. Uncoated wood won鈥檛 last as long as wood that has been treated with a good surface finish.

  • How do you stain a wood table top?

  • Liberally apply wood stain to the surface using a paintbrush or clean cotton cloth. Allow the stain to soak into the wood for at least 10 minutes. Wipe off all the excess stain with a dry cloth. Wait 8 hours or, if necessary, overnight for the stain to thoroughly dry. Gently stir鈥攏ever shake鈥攁 can of polyurethane varnish.

  • How do you refinish a table top?

  • When you鈥檙e done stripping the table, sand the surface in the direction of the grain to even out any discoloration or irregularities. Then, apply the new finish by applying a coat of stain.

    Leave a Reply

    Your email address will not be published.