how to finish an outdoor wood table

Best answer


To effectively protect and finish outdoor wood furnitureapply a first coat of 25 percent varnish to 75 percent mineral spirits. When this has dried, sand lightly with 150 grit sand paper, wipe clean with cloth and mineral spirits, and then apply a coat of 50 percent varnish to 50 percent mineral spirits.

People also ask


  • How to finish wood furniture for outdoor use?

  • How to finish wood furniture for outdoor use. 1 STEP 1: Prepare by sanding. The first step is to sand your piece of furniture. Sanding 鈥?even lightly 鈥?will remove the existing top coat and allow … 2 STEP 2: Wipe clean. 3 STEP 3: Apply sealant. 4 STEP 4: Keep covered if possible.

  • What is the best wood finish for an outdoor table?

  • If you’re looking for a wood finish that stands up to water and sun, you can’t find a better person to ask than a boat refinisher. The finish that does the best job protecting the wood on a boat is going to be the best one for your outdoor table.

  • How do you seal wood furniture?

  • The first step is to sand your piece of furniture. Sanding 鈥?even lightly 鈥?will remove the existing top coat and allow the new wood sealant to stick better. Even if you have bare wood, sanding a little bit will help to open up the wood surface to best absorb the new sealant.

  • How do you finish an exterior wood desk?

  • Mix a good exterior epoxy, preferably one that is fairly thin, and slather it liberally onto the end grain. Let it soak in a bit before scraping off any excess. Once the epoxy cures, you can lightly sand any roughness. Water-based exterior poly (left) is slightly less amber than oil-based (right). Choosing a finish raises a few questions.

    Leave a Reply

    Your email address will not be published. Required fields are marked *