how to fix squeaky wood floors under carpet

Best answer


Use a hammer to locate a floor joist within the squeaky section of the floor.Tap the carpeted floor with the hammer and listen for a dull thud,indicating a joist below.Chuck the joist-finding screw into the drill/driver.Drill a hole through carpeting and subfloor and into the joist; if you miss the joist,move over a couple of inches and try again.Once you find a floor joist,measure over 16 inches and locate the next joist.Press the tripod-shaped alignment and depth control fixture firmly into the carpet directly over the joist.Use the drill/driver to drive a scored screw down through the center of the fixture until the screw bottoms out.Drive screws into all the joists within the squeaky section at both ends of the room.

People also ask


  • How do you fix a squeaky carpet?

  • To tackle a squeaky carpet floor, you can use a squeaking floor repair kit and a drill to fix this problem. The high-pitched chirps of plywood and solid-board subflooring may also be heard. Squeaks are widespread in classic hardwood strip flooring and carpet.

  • How do you fix squeaky floor joists in a basement?

  • Press the tripod-shaped alignment and depth control fixture firmly into the carpet directly over the joist. Use the drill/driver to drive a scored screw down through the center of the fixture until the screw bottoms out. Drive screws into all the joists within the squeaky section at both ends of the room.

  • Can you fix a squeaking floor in an afternoon?

  • It鈥檚 not necessary to have to pull up any of your carpet to fix, and with just a few simple tools you can easily fix this problem in an afternoon. Floor squeaks are caused by gaps between the sub-floor and the floor joists which have separated over time and can be fixed by simply reattaching that sub-floor back to the framing.

  • Why does my floor Squeak under my carpet?

  • The hardwood floorboards rubbing on the plywood subfloor or the nails holding the flooring may be causing annoyance-causing squeaks under the carpet. Short screws driven through the subfloor鈥檚 underside and into the floor鈥檚 foundation may halt this motion and noise in either situation.

    Leave a Reply

    Your email address will not be published.