how to fix stripped wood screw hole

Best answer


How do I fixa strippedscrewhole? Cut some thin strips or shavings from a piece of scrap wood from the same (or similar) species of wood. Dip the tips of the strips into wood glue and tap them lightly into the hole with a hammer until the hole is filled. Let the glue dry for a few hours.

People also ask


  • How do you fix a stripped screw?

  • The glue will fuse the toothpicks to the inside of the stripped screw hole. The wooden toothpicks will create the resistance that the screw鈥檚 threads need to stay securely in the hole. Read the instructions on your wood glue to see if drying times differ with the brand of glue that you purchased. Re-insert the screw back into the hole.

  • How do you drill a screw out of wood?

  • Trim off the strips with a sharp knife or chisel if they’re sticking out of the hole, and sand the area, if necessary. Use an awl or drill with small twist bit to bore a very small pilot hole into the filled wood, then drive the original screw into the pilot hole.

  • How do you fill a screw with wood filler?

  • Use an awl or drill with small twist bit to bore a very small pilot hole into the filled wood, then drive the original screw into the pilot hole. It’s best to cut the filler strips from the same type of wood because it will look and behave the same as the original wood.

  • How do you drill a pilot hole for a screwdriver?

  • Drill a very small pilot hole, using a drill or an awl, into the filled wood, then drive the original screw into the pilot hole. It’s best to cut the strips from the same type of wood as the wood with the stripped holes because it will look and behave the same as the original wood.

    Leave a Reply

    Your email address will not be published.