how to make a wooden box frame

Best answer


Apply PVA wood glue to the mitred edges of the timber. Join the four pieces of timber together to make the box shape. A good tip is to use masking tape to hold the box together and keep the edges flush. Then use a nail gun to secure the pieces of timber together.

People also ask


  • How to make a wooden picture frame step by step?

  • Making a Wooden Picture Frame. 1 Step 1: Prep the Timber. 2 More Images. The wood I chose for this frame was a length of a very dense, red coloured hard wood. I assume red gum or … 2 Step 2: Keep Prepping the Timber… 3 Step 3: Make the Cuts. 4 Step 4: Glue Up. 5 Step 5: Nearing the End. More items

  • How do you build a box frame?

  • Although you can build a box frame by simply screwing into the end grain, that results in a very weak box frame. Instead, a better way is to use pocket hole screws to join wood at 90. For this, you’ll need a pocket-hole jig. The one by Kreg is highly popular and that’s the one I’ll be using in this guide. MellowPine is reader-supported.

  • How do you make a wooden box out of timber?

  • Join the four pieces of timber together to make the box shape. A good tip is to use masking tape to hold the box together and keep the edges flush. Then use a nail gun to secure the pieces of timber together.

  • How do you make a shadow box frame?

  • Take 1 of the shorter length of 1 by 4 in (2.5 by 10.2 cm) boards that will form either the top or the bottom of the shadow box frame and squeeze a line of wood glue across the bottom edge of it. Use enough glue to form an even and consistent line along the bottom. Wood glue is available at home improvement stores, at hardware stores, and online.

    Leave a Reply

    Your email address will not be published. Required fields are marked *