how to make wooden radiator covers

Best answer

To builda radiator cover,start by measuring the dimensions of your radiator and using a skill or circular saw to cut pieces of wood for the top,sides,and front,leaving 2 inches of clearance on all sides. Then,cut a rectangle from the front piece of wood and secure a piece of metal grating over the hole using staples.

People also ask

  • How to build a radiator cover?

  • First of all, we recommend you to build the front face of the radiator cover. Use 14 slats for the legs and for the horizontal components. Drill pocket holes at both ends of the horizontal supports and secure them to the vertical legs by using 1 1/4鈥?screws. Cut both ends of the legs in a decorative manner.

  • How can I hide the radiators in my house?

  • If you don’t like the look of your radiators then this modern-looking wooden cover is the best solution to hide them. (via This good looking and practical radiator cover is made of an IKEA Slat Bed Base. Simple and quick way to hide that ugly thing and get yourself an addition table surface. (via https:)

  • How can I protect my kids from cast iron radiators?

  • Steam radiators get much hotter than hot water radiators and this cover is a great solution to protect your kids from cast-iron ones. Besides if you decide to cover the backside of your radiator with foil the cover is a great way to hide that. (via instructables)

  • How much space do you need to cover a radiator?

  • You will want to leave a 40mm gap around the outside of the radiator to allow sufficient air flow once the cover is attached. Starting with the width of the radiator, add 40mm to one end, or both ends if you intend to cover the valve. In my example I will cover one side only, leaving access to the valve on one side.

    Leave a Reply

    Your email address will not be published. Required fields are marked *