To paint a hardwood floor, start bysanding the wood to remove any preexisting layers of varnish or enamel. Then, prime any unfinished wood with an oil-based primer. Once the primer has dried, you can apply your top coat with a brush or roller depending on the texture that you want.
People also ask
How do you prepare wood for painting?
Before you start painting wood, sand the wood and clean off any dust for a smooth finish. Then, apply a primer to help the paint achieve an even, rich look. Next, tape off any sections that you want to remain unpainted or paint in a different color.
Can you paint over an existing wood surface?
Never attempt to paint an existing wood surface without preparing its surface. Applying a direct coat of paint over the old coating will not work and eventually will tend to peel, especially if it has a glossy finish. This painting technique needs to prepare the wooden surface first. Follow these simple steps to get your surface prepared:
How to paint wood with a paintbrush?
Tap the paintbrush on the side of the paint bucket, turn the paintbrush 180, and tap the other side of the paintbrush against the bucket. You should have a fully-loaded paintbrush with just the right amount of paint for good coverage. With a loaded brush, start from the top of the wood and move down.
Why primer Wood before painting?
Priming the wood before painting is not just an important step; it separates the professional-grade paint job from an amateur job. Primers are chemically formulated to bond to problem surfaces, and to give paint an even surface to bond to.