how to replace a piece of wood siding

Best answer


Remove any old nails, paint and caulkfrom around the siding. A utility knife can be handy for this task. Use the old piece of siding to measure the new piece and use a circular saw to cut new siding to fit the gap. Remember: Measure twice, cut once. Nail the new piece of siding in place. Caulk all the edges.

People also ask


  • How do you replace engineered wood siding?

  • Learn to replace engineered wood siding with these easy steps: Step 1: Remove nails from the siding. Pull the existing piece off. Examine the water-resistive barrier and other structural elements behind the siding to ensure no other repairs need to be made. Step 2: Place flashing tape over the nail holes on the wall.

  • How to fix broken wood siding?

  • If the broken wood siding is tongue-and-groove, follow the above procedure to change it. When you put the new piece in, use a utility knife to cut off the back side of the groove. Otherwise, the piece won鈥檛 fit into the opening. Don鈥檛 hit the nails too hard with the hammer or you might damage the wood.

  • How do you attach new siding to old siding?

  • Attach Replacement Siding: To install the replacement siding, start at the bottom and work your way up. Overlap the boards so each row of new siding has the same reveal as the old siding. You can use a tape measure to mark the reveal of each piece of replacement siding, or make a spacer gauge from two blocks of wood screwed together.

  • How do you make wood siding last longer?

  • Painting wood siding helps it last. Prime the back and edges of the new siding. Thoroughly paint all exposed edges and grooves. Do not drive the nails flush or countersink them. The heads will break the paper face, allowing water to soak in and deteriorate the siding. Caulk any nailheads that break the paper face.

    Leave a Reply

    Your email address will not be published. Required fields are marked *