how to replace gasket on wood stove door

Best answer


A wood stove door gasket can be replaced by,cleaning the channel for residue, spreading gasket glue evenly in the channel, once the glue is tacky to touch the gasket can be loosely laid into the channel then cut off when both ends are touching, then close the door and wait 24 hours before use.

People also ask


  • How to replace a braided gasket on a wood stove?

  • How to Replace Braided Gaskets on Wood Stoves. 1. Remove the stove door, if possible, and lay it on a piece of cardboard on a table. Pull the old gasket out of the gasket groove in the door. Scrape … 2. Measure the length of the groove around the perimeter of the door with the tape measure. …

  • How to remove wood stove gasket cement?

  • To remove the existing door gasket from your wood stove: Ply away the rope from the stove door using a tool such as a flat head screwdriver to get underneath the rope. Pull the rope away from stove door using either your hands or a tool such as pliers. How To Remove Wood Stove Gasket Cement

  • What is a gasket on a wood burning stove?

  • A gasket on a wood burning stove is the seal located around the inside of the stove door. A wood stove door gasket typically looks like a piece of rope stuck to the stove. When the stove door is closed the gasket helps to provide an airtight seal so that all of the air coming into the stove is through the air vents, and therefore controllable.

  • What to do if your wood stove door is leaking?

  • A wood-burning stove, like any appliance needs maintenance. One maintenance item is the braided fiberglass gasket that seals the door edge. A leaky door gasket reduces stove efficiency. With the stove cold, test the gasket by closing the door on a piece of paper.

    Leave a Reply

    Your email address will not be published. Required fields are marked *