how to replace rotted wood floor

Best answer


After the old flooring has been removed using a crow bar, replace any rotten floor joists withtreated lumberbefore installing the flooring. Use a rubber mallet or a scrap of the flooring as a protective block when tapping the floor boards together. Blind-nail the flooring in the tongue using galvanized or stainless steel finishing nails.

People also ask


  • How do you fix rotted wood on the floor?

  • Whether you choose to use epoxy, a wood filler, or another piece of wood to patch the rotted area, you can have your home looking good as new! Claw out rotted wood out with a hammer. Use a claw hammer to dig out loose rot. Place the claw of the hammer at the base of the rot. Apply pressure as you pull the claw back towards you.

  • How do you remove old hardwood flooring?

  • Removing the Old Hardwood Put on gloves, knee pads, and protective eye glasses. Measure the thickness of the current hardwood. Make cuts perpendicular to the direction the wood is laying. Pry up the the first hardwood plank using a pry bar and mallet. Remove the remaining planks.

  • How do you remove rotten joists from a porch floor?

  • It’s best to do it before the joists rot. Set the cutting depth of a circular saw to the thickness of one of the porch flooring boards, instructs This Old House. Cut two lengthwise lines through one of the rotten boards so you can pry it out. The lines should be about an inch apart.

  • Can you replace hardwood flooring with floating flooring?

  • You don’t have to replace your old floor with the exact same wood or flooring type that you just removed! You can glue your new hardwood flooring into place if you like. You can also install nail-down, floating (or locking) hardwood flooring as a replacement.

    Leave a Reply

    Your email address will not be published.