how to sand treated wood

Best answer

Sand the wood twice with amedium grit sandpaper(100 to 120-grit) and twice with a fine grit sandpaper to remove any imperfections and prepare the surface for stain. Clean the wood with a damp rag twice,which serves to both remove any debris and condition the wood.

People also ask

  • Can You sand down pressure treated wood?

  • It’s possible to sand pressure-treated lumber, but protect yourself with goggles, dust mask, and work gloves. Considering this, can pressure treated wood be sanded?

  • Should I sand my pressure treated deck before staining?

  • Sanding your deck before staining strips the outer layer of sealer and stain, and removes damaged wood and smooths away splinters. The deck must be very dry and you must wash off the dust afterward, so you may want to sand before cleaning if your deck is not particularly dirty. How long will pressure treated wood last outside? 40 years

  • What are some tips and tricks for sanding wood?

  • Important Tips and Tricks for Sanding 1 Be sure to take your time, so the job is done right. … 2 Move the sander in the direction of the wood, so that it follows the wood grain. 3 For board edges and railing, you may want to switch to a detail or palm sander for an easier fit and better control. … More items…

  • How do you clean treated wood after painting?

  • Normal soap and water will not be adequate enough. Cleaning the lumber removes any dirt or debris on the surface as well as any paint that may be left behind from a previous removal effort. In order to properly clean the treated lumber, use a pressure washer set between 1,200 and 1,500 PSI.

    Leave a Reply

    Your email address will not be published. Required fields are marked *